DIY Step-By-Step Pool Cleaning Guide. Swimming pools, as fancy and entertaining as they are, require a lot of maintenance work. Some people prefer to rely on professional pool cleaning services to cope with all of it. Nevertheless, if you are on a tight budget, you can try it yourself!
Please keep up with your cleaning duties and use the right equipment. By doing that, you avoid running into any issues down the road. Stick around as we outline the process of cleaning a swimming pool by yourself:
I want to point out that skimming the pool area is the first step you must take as part of your pool-cleaning endeavors. With the help of a pool net, remove all the floating debris you see on the surface (flowers, bugs, leaves, etc.)
Then, could you use a vacuum cleaner? By vacuuming the pool, you rid it of the loose debris that settles at the bottom. While many collections include their vacuuming system, they’re not as efficient as a standalone vacuum cleaner, so you should consider buying or renting one. You can find affordable vacuuming/skimming robots online and use them periodically to guarantee a long-lasting, sparkling-clean pool.
Pool filters, no matter the type, require backwashing. These filters are prone to accumulate a lot of trapped particles, which may hinder their capabilities over time.
You should not neglect your pool’s filter-cleaning duties for more than two weeks. Otherwise, the filter will end up clogged and cease working altogether. You wouldn’t want that to happen since the filter’s role is to keep your pool water clean.
Please keep a close eye on your pool’s chemical balance every couple of days, especially during peak season. This ensures that algae will not thrive.
These are the optimal values you should attain:
Shock the pool by pouring chlorine until it reaches approximately 8 to 15 ppm. This guarantees that you kill off algae and other microbes present in the water. Could you do this at least once a week?
Most pool shock products don’t contain stabilizers, so you should avoid shocking the pool during the day, as the product will burn off under sunlight.
If your pool goes out of balance, try rebalancing it by adding chemicals first. However, if it’s unbalanced beyond repair, the best solution is to drain it. We should stress that you should not drain your pool water indiscriminately but only when you have no other option. It would be best if you took advantage of your empty pool to do a more in-depth cleaning job.
Admittedly, this is time-consuming, but it’s the best way to recover proper water balance and avoid further complications. Scrub away any oily patches or stuck grime from the pool walls. For this purpose, use a soft cleaner and a special nylon brush. Avoid brushes with stiff bristles, as they could damage the surface.
The floor may also require special treatment. There are two ways of going about it, depending on your pool type:
You can remove dirt from the tile lines with the same brush you used for the walls. After that, could you wait for the surface to dry off and proceed to vacuum? For plaster pools, apply some sealant afterward to boost water resistance. This is a crucial step since plaster is a highly porous material.
Lastly, refill the pool with fresh water. Make sure the water is lean and balanced. Otherwise, all your hard cleaning work would go “down the drain.”